MITSUBISHI ELECTRIC M341i - Manual (Page 31)

31-
Calls & Times
The call type and the accumulated times of outgoing and incoming calls are dis-
played.
Selecting Details displays information on calls made on your home network, on
National roaming and on International roaming.
BALANCE INFORMATION
(
SUBSCRIPTION DEPENDENT
)
This service may be supplied by your service provider. It allows you to view the remaining air-
time balance on your phone line.
Please contact your service provider for more information. If your subscription allows access to
this information:
When selecting Call , if the balance information number is already stored, a call is sent to the
balance information centre. If no number is stored, select Set number and enter it. Press OK
to store the number, then select Call to call the information centre number.
REMINDER - CALL DURATION
You can set a duration reminder to beep regularly to remind you of the time spent on your call.
The frequency can be any multiple of 1 minute (up to 59 minutes).
CALL TIMER - RESET
This feature allows you to reset the call timers. The 4 digit lock code is required to reset the call
timers (default lock code: '0000').
CALL COSTS
-
MANAGEMENT
Some service providers offer an Advice of Charge (AoC) subscription service allowing you to
view the cost of the last call cost, the total calls cost and the remaining balance on your account
(once a 'credit limit' has been set ).
To display these, you must first set a currency value and enter an average cost per unit (only
calls units are displayed if the cost information is not stored).
To set a currency value per unit:
If Line 2 is active too, 'All Calls' for Line 1 and Line 2 are displayed separately.
1 Press OK . Select Calls & Times .
2 Select Call timers .
3 Select Balance information .
4 Select Call or Set number .
1 Press OK . Select Calls & Times .
2 Select Call timers .
3 Select Reminder .
4 Select On to activate the Call timer.
5 Enter the call timer interval (e.g.: 2 = a beep sounds every 2 minutes whilst in conversation).
6 Press OK to validate the entry.
1 Press OK . Select Calls & Times .
2 Select Call timers .
3 Select Reset .
4 Select Yes .
5 Enter the phone lock code and press OK .
1 Press OK . Select Calls & Times .
2 Select Call costs .
3 Select Display cost type .
4 Select Currency . The current currency unit value is displayed.
5 Select Modify . Enter your PIN 2 code and press OK .
6 Enter the currency name (up to 3 letters). Press OK to validate.
7 Enter the unit cost (e.g.: 0.15 Euro per minute). And press OK to validate.