I-mode – MITSUBISHI ELECTRIC M341i User Manual
Page 53
53-
i-mode
SETTING
THE
TIME
OUT
This allows you to set the time limit for i-mode disconnection when there is no response from
the network:
SHOWING
TABLES
You can choose whether or not tables should be displayed when available on i-mode webpages.
LOADING
IMAGES
This allows you to choose whether or not your mobile can download and therefore display the
images contained on the webpages.
ADJUSTING
TEXT
The text on webpages may not automatically fit the size of your mobile display. This setting al-
lows you to wrap the text and adjust it so that it fits the screen of your mobile.
READING
CERTIFICATES
Certificates are used for network security exchange (e.g. for secure payment transactions).
SENDING
TERMINAL
INFO
To allow or forbid the automatic sending of mobile-related information (linked to the i-mode) to
the server.
SET
HOMEPAGE
To define the homepage address. This allows you to access your favourite webpage via the Go
to webpage menu (see ii-mode applications, page 51).
CHECKING
THE
SETTINGS
You can check the status of all your settings via this menu.
GOING
BACK
1
Select
Set time out
or press .
2
Select
60 seconds
,
90 seconds
or
Disabled
(if you do not want automatic disconnection).
3
Scroll down as many times as necessary until
is highlighted and press
OK
to validate.
1
Select
Show tables
or press .
2
Select
Yes
or
No
.
3
Scroll down as many times as necessary until
is highlighted and press
OK
to validate.
1
Select
Load images
or press .
2
Select
Yes
or
No
.
3
Scroll down as many times as necessary until
is highlighted and press
OK
to validate.
1
Select
Wrap text
or press .
2
Select
Yes
or
No
.
3
Scroll down as many times as necessary until
is highlighted and press
OK
to validate.
1
Select
Certificates
or press .
2
Select one of the Certificates available on the mobile and press
OK
. The selected certificate
is then displayed.
3
Press
Cancel
(left soft key) to return to the certificates list.
1
Select
Send terminal info
or press .
2
Select
Yes
or
No
.
3
Scroll down as many times as necessary until
is highlighted and press
OK
to validate.
1
Select
Set homepage
or press .
2
Select
Valid
and enter the http:// address.
3
Scroll down as many times as necessary until
is highlighted and press
OK
to validate.
1
Select
Check settings
or press to view the contents of each parameter.
1
Select
Back
or press to go back to the i-mode menu.