MITSUBISHI ELECTRIC M341i - Manual (Page 67)

67-
Settings
CALL WAITING
This network dependent feature allows you to receive a new call while a call is already in
progress (network dependent). To activate the call waiting feature:
To put a call on hold and switch from Call 1 to Call 2:
SENDING MY ID
You can disable the sending of your own number on a call by call basis by adding #31# before
the number you are dialling. You can also ask your service operator to hide your mobile phone
number by default. Once hidden by your operator, you can show your number, on a call by call
basis, by entering *31# before the number you are calling.
Please contact your service provider for more information.
CALLER LINE IDENTITY
-
SHOWING
/
HIDING YOUR MOBILE NUMBER
(
NETWORK DEPENDENT
)
Most networks have Caller Line Identity feature (CLI). This feature allows the phone number or
the identity of the caller to be displayed on incoming calls.
STANDARD NETWORK SETTING
To reset the standard network setting and send your mobile ID:
HIDING OR SHOWING YOUR NUMBER
VIEWING YOUR CURRENT ID STATUS
RECEIVING CALLER ID
You can check the availability of this feature on your network or subscription .
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Call waiting .
4 Select Activate . Activated or Check your request is then displayed.
You can also cancel or check the service status.
1 Whilst a call is in progress, a beep sounds to indicate a second incoming call.
Select Replace to take Call 2 and end Call 1, Select Reject to refuse Call 2 or press theCall/
Send key to put Call 1 on hold and take Call 2.
Press the End/Off key to end Call 1 and take Call 2.
2 Select Options then select Swap to get back to Call 1 and put Call 2 on hold or select Join
to have a 3 party conversation.
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Sending my ID .
4 Select My settings .
5 Select Preset . The phone resets and reverts to its original network setting.
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Sending my ID .
4 Select My settings .
5 Select Hide my ID or Show my ID .
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Sending my ID .
4 Select Status .
Your current ID status is displayed.
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Receiving caller ID .
The network then either returns Presentation available or Presentation unavailable infor-
mation.