MITSUBISHI ELECTRIC M341i - Manual (Page 8)

8-
Getting started
ENDING A CALL :
CLOSING THE CLAMSHELL
When closing the clamshell, the main screen is automatically switched off and the external
screen is automaticaly switched on. When the clamshell is closed and the mobile receives a
call, an incoming call animation and the caller’s identity (network dependent feature) are dis-
played on the external screen.
HOLDING YOUR PHONE
(
WHILE MAKING OR RECEIVING A CALL
)
THE STANDBY DISPLAY
When switched on, the mobile searches for connection with the network. Once the
connection has been established, a beep sounds and the network and/or service
provider name or logo are displayed together with the time and date, the signal
strength and the battery charge level. If the mobile cannot find a valid network, the
signal strength and the operator name are not displayed.
The four arrows indicate that features can be accesed via the four arrows on the
cursor key.
The oval symbol in the middle of the cursor key indicates that the Menu can be
accessed by pressing the OK key (in the middle of the cursor key).
Mail and i-mode indicate that you can directly access the mailer and the i-mode service by
pressing the softkeys.
indicates that your mobile is attached to a GPRS network.
KEYPAD LOCK
When activated, the keypad lock feature prevents accidental action occurrings (e.g. camera ac-
tivation) whilst the phone is being carried in a pocket or a bag for instance. Incoming calls can
however be received and answered. Once the call is over, the keypad lock is automatically re-
activated.
To activate the keypad lock from the standby display:
To activate the keypad lock from the main menu:
To deactivate the keypad lock:
1 Press the On/Off key or the side key.
You can also end a call by closing the clamshell. Please see active flip, page 65.
When using the hands free mode, do not put the phone to your ear.
1 Press and hold . Keypad locked is displayed.
1 Press OK . Select Settings .
2 Select Keypad , then select Keypad lock .
1 Select Unlock and press or press and hold . Keypad unlocked is displayed.
How to hold
the phone.
Avoid
covering the up-
per back half of
the phone so as to
allow maximum
emssion and
reception quality.