Minolta CD-10 - Manual (Page 5)

3
Getting Started
Power source
Use a standard domestic household power supply (100 to 240V,
50/60Hz).
Proper places for use and storage
- This unit is to be used at temperatures between +5
°
C and +40
°
C
and at relative humidities between 20% and 80% (no condensation).
- Do not use or store the unit in an excessively hot or cold place.
- Do not use or store the unit in a dusty place or in direct sunlight.
- Do not use or store the unit in a place subject to excessive vibra-
tion or in an unstable place.
- Do not place the unit close to a system which generates strong
magnetic fields (motor, transformer, television, loudspeaker, mag-
net etc.).
- Do not obstruct vents, it may cause the internal temperature to
rise. Do not stack the units. Do not use in a non ventilated area.
Precautions for connection
When connecting this unit to a personal computer or any other
equipment, always first turn off the main power of the equipment
to be connected.
Precautions for transportation
- Disconnect cables and remove the PC card before transporting
the unit.
- Use the cardboard box in which the unit was initially packed.
- This is a precision device. Do not subject to excessive shock or
vibration.
Maintenance of the cabinet
- Do not use thinner, benzene, insecticide and other volatile
substances to clean the cabinet.
- Clean the cabinet and front panel with a soft cloth. Remove dirt
with a soft cloth moistened with a small amount of neutral deter-
gent diluted with water. Wipe dry after cleaning.
- Disconnect the power plug from the outlet before performing any
maintenance on the unit.