MicroNet Technology SP5530 - Manual (Page 31)

- 28 -
Clicking Reset allows you to resume the factory default settings of the camera.
This function is the same as pressing the Reset button on the camera.
Reboot
Click the Reboot item of the Configuration submenu to bring up the following
screen for restarting the camera.
Click Reboot to restart the camera.
After rebooting, both the Power LED and Link LED on the front panel will light on,
and then you can enter your Name and Password to login.
Status
Click the Status item of the Configuration submenu to bring up the following
screen, which displays the current configuration of the camera.