MicroNet Technology SP5530 - Manual (Page 50)

- 47 -
- Invoke Alarm:
Select this option to enable alarm when motion is detected by
the system.
- Send e-mail:
When this option is checked, click the Mailing Configuration in
the left column to enter the required information (see the following section).
- Play music:
Selecting this option allows the system to play music. You can
select a music file by clicking the Browse music file button, and set up the
interval time in the following pull-down menu (1 to 20 seconds).
Tools
The Tools item allows you to configure the alarm and e-mail settings.
- Reset: Restores the original camera settings. Dialog box showing “Do you
really want to reset this device?” will pop up. Click Yes in the pop-up dialog
box to confirm.
- Factory Reset:
Restores the factory default settings of the camera. Dialog box
showing “Do you really want to factory reset this device?” will pop up. Click
Yes
in the pop-up dialog box to confirm.
- Update Firmware:
When new firmware is available, you can upgrade it using
this option. Click Browse to find the firmware file, and then click Update.