MicroNet Technology SP5530 - Manual (Page 44)

- 41 -
Select the view mode from these buttons.
Show one camera in View Window.
Show four cameras in View Window.
Show six cameras in View Window with the first one as
the major view.
Show eight cameras in View Window with the first one as
the major view.
Show nine cameras in View Window.
Show ten cameras in View Window with the first two as
the major views.
Show thirteen cameras in View Window with the first one
as the major view.
Show sixteen cameras in View Window.
Show the selected camera in full screen view.
[ View Mode Buttons
Enable displaying the video views in circles.
\
Key Lock Button Click to lock/unlock the camera. When locked, the user
cannot operate any camera.
]
Power Button Click to exit or minimize IPView Pro.
^ Pan/Tilt Control
Panel When the camera is added, the Pan/Tilt control buttons
will appear on the panel, as shown below:
/ / / / / / / : Click these buttons to adjust
the camera’s viewing angle to Up/ Down/Left/Right/Left-
Up/Left-Down/Right-Up/Right-Down.
: Once you have saved two (or more) positions in the
camera, click the Swing button to control the camera
swinging from one position to another position.
: Click the Home button to return the camera to the
default position.
_
Record Button Records video clip of the selected camera and saves it in
the computer. The storage position can be configured in
System Configuration. When you click the button, you can
select Manual Record, Schedule Record, or Motion
Record
.
`
Play Button Play the recorded video file in the computer.
a
Configuration
Button
Click to enter the System Configuration.