MicroNet Technology SP5530 - Manual (Page 46)

- 43 -
As an alternative, you can add a camera by entering its IP address.
1. Select the
Input IP
tab.
2. Enter the camera’s IP address (default: 192.168.1.2) and Port (default:
80), and then click Add Camera.
3. Click Save, and then click the Configure button to return to View Window.
The selected camera’s video will be displayed now.
Removing a Camera
To remove the camera from the list:
1. Select the camera you want to remove.
2. Click Delete Camera.
Viewing a Camera
From the View Modes of the panel, you can select one-camera mode or other
modes to display your video. IPView Pro allows you to view up to a maximum of
16 cameras at the same time.
For example, if you use only one camera, select one-camera mode (
), and
the View Window will display the view as figure 1.
If there are four cameras, select four-camera mode (
), and the View Window
will display the view as figure 2.
Figure 1. Figure 2.
Enter the camera’s
IP address and Port.
Click the Add
Camera button
.
The camera is added.