MicroNet Technology SP3508A - Manual (Page 31)

5.10 Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D)
for avoiding loops in SP3508A networks. When STP enabled, ensure that
only one path at a time is active between any two nodes on the network. It is
recommended that users enable STP on all SP3508A to ensure a single
active path on the network.
1. User can view spanning tree information about the Root Bridge in
the following screen.
2. Users can view the spanning tree status of the SP3508A in the
following screen.
3. Users can set new value for STP parameter, then click <Apply>
button to modify.
28