MicroNet Technology SP3508A - Manual (Page 8)

2.5 Connecting to RJ-11
y Please ensure suitable VDSL Modem (SP3501AS) is installed before
making a connection to any of the IP DSLAM (1-8) station ports.
Users need to prepare 18 ~ 26 gauge one twist pair phone Line wiring
with RJ-11 plugs at both ends.
y The Modem’s RJ-11 ports are easy-to-use and do not require
installation of additional wiring. Every RJ-11 modular phone jack in the
home can become a port on the LAN.
y Networking devices can be installed on a single telephone wire that
can span up to maximum of 1.7km between the two points.
y SP3508A has embedded Splitter between every VDSL side (VDSL
Line) and POTS side (POTS port). It permits user to deliver
broadband service on the same lines as Plain Old Telephone Service
(POTS), PBX, ISDN traffic and VDSL Signal.
y When inserting a RJ-11 plug, be sure the tab on the plug clicks into
position to ensure that it is properly seated.
5