Moxa Technologies 6110 - Manual (Page 10)

1-2
port that can connect to many types of Modbus device. By translating
Modbus/TCP (Ethernet) and Modbus/ASCII/RTU (Serial) protocols, a PLC with
Ethernet can use the RS-232/485 interface to seamlessly communicate with
instruments.
Powerful operation modes for versatile Modbus applications
For Modbus protocol conversions, it is necessary to define a Master and Slave
device, but unlike other Modbus Gateways, NPort 6110 allows users to configure
Master/Slave for both the Ethernet and serial sides.
Extra address mapping and exception parameters are provided to ensure that
most situations can be handled.
Windows utility for easy setup and traffic monitoring
NPort 6110 is powerful yet very easy to use. An intuitive Windows utility
automatically searches for all available NPort 6110 units on the LAN.
Traffic Monitoring within the utility helps you troubleshoot any Modbus
communication problem, such as connection status check, or address translation
error check.
Features
❑ Integration of Modbus serial and Modbus Ethernet devices
❑ Supports connecting a Modbus/TCP Master device to up to 31
Modbus/ASCII/RTU slave devices
❑ Supports connecting a Modbus/ASCII/RTU master device to up to 4
Modbus/TCP slave devices
❑ Easy-to-use Windows utility for configuration over Ethernet
❑ 10/100M fast Ethernet with automatic IP setting (DHCP)
❑ One software selectable RS-232/485/422 interface
❑ High speed serial interface—up to 230.4 Kbps