Wall mount, Wall mount -8 – Moxa Technologies 6110 User Manual

Page 22

Advertising

2-8

Wall Mount

For many industrial applications, you will find it convenient to mount NPort

6110 on the wall, using two screws, as indicated below.

STEP 1: Screw two screws, separated by 7.8 cm, into the wall. The heads of the

screws should be no greater than 6.5 mm in diameter, and the shafts

should be no greater than 3 mm in diameter. Do not screw the screws

in all the way—leave a space of about 2 mm to allow room for sliding

the NPort 6110 unit’s ears between the wall and the screws.

7.8 cm

6.5 mm

STEP 2: Insert the two screw heads

through the large parts of the

keyhole shaped apertures, and

then slide NPort 6110

downwards, as indicated.

STEP 3: For added stability, tighten

the two screws.

RS-232/422/485

RESET

10/100M
Ethernet

PWR

Link

Ready

Modbus/TCP to Serial

Communication Gateway

6110

9-30V