Multiquip Light Tower Mount Type Balloon Light GB2000 - Manual (Page 25)

gb2000 balloon lighT• operaTion and parTs manual — rev. #3 (08/30/12)— page 25
type 2 setup (s/n G1900119 and abOve)
Figure 18. Adapter Plate Mounting Installation
VIEW FROM BACK SIDE
BOLT (4)
FLAT WASHER (8)
LOCK WASHER (4)
HEX NUT (4)
SUPPORT
BRACKET (2)
T-BAR
LAMP ADAPTER
PLATE
BUBBLE LEVEL
SPACER
LOW END
BOLT
1
NOTES:
It is important for the adapter SPACER to seat
against the T-Bar as shown above.
2 For proper alignment of the adapter plate,
use of a bubble level is required.
FLUSH W/
T-BAR BOTTOM
1
2
BACK SIDE
UNDERNEATH
1
2
3
4
1
2
3
4
T-BAR
J1
J2
BOLT
SUPPORT
BRACKET
2
LAMP ADAPTER
PLATE