Multiquip Light Tower Mount Type Balloon Light GB2000 - Manual (Page 37)

gb2000 balloon lighT• operaTion and parTs manual — rev. #3 (08/30/12)— page 37
MaintenanCe
6. Secure lamp holder on top of the lamp.
7. Reinstall lamp guard.
8. Pull down balloon and zip the bottom zipper to cover
lamp.
replaCing balloon
1. Unzip the top and bottom of the balloon. See Figure 38.
Figure 38. Unzipping Balloon
2. Slide out the old or worn balloon over the top of the
lamp guard assembly. See Figure 39.
Figure 39. Removing Old Balloon
NOTICE
Do not use excessive force when screwing the lamp to
prevent lamp from breaking.
UNZIP TOP AND
BOTTOM ZIPPERS
BALLOON
REMOVE OLD
BALLOON
3. Slide in the new replacement balloon over the top of
the lamp guard assembly. See Figure 40.
Figure 40. Replacing Balloon
4. Zip up the top and bottom of the new balloon. See
Figure 41.
Figure 41. Zipping Up New Balloon
INSTALL NEW
BALLOON
ZIP UP
NEW BALLOON