Midland Radio SYN-TECH III P25 - Manual (Page 14)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
6
3.2.4 Up/Down keys
When the channel switch is in the sixteenth position, the up/down keys provide
up/down channel select from standby mode. The up/down keys are generally used to
scroll through lists within other functions.
Up/down channel select is available only if more than sixteen channels
are programmed in the zone.
3.2.5 Left soft key (Menu)
The left soft key enters the menus from standby mode. The left soft key is generally
used as SELECT or OK within other functions.
3.2.6 Right soft key (Index)
The right soft key accesses the index (20 unit address book) from standby mode. Once
the appropriate ID is displayed, press SELECT to edit the entry or the (scan)
key to initiate an individual call to the displayed unit. Up to six of the first entries may be
predefined in radio programming and may not be editable. Individual call initiation may
be disabled by radio programming.
The right soft key is generally used as EXIT within other functions. The right soft key is
used as nuisance channel delete during scan.
3.2.7 F1 Side Button (Power Adjust/Mode Change)
A long press of this key changes the transmit power level. The selections are high,
medium and low power. A default power level is set each time the channel is selected.
A short press of this key changes the transmit mode on mixed-mode and digital
channels. The selections may include analog, digital clear, and digital encrypted
transmit modes. A default mode is set each time the channel is selected.