Midland Radio SYN-TECH III P25 - Manual (Page 32)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
24
4.1.5.2 Digital Transmissions
1. Press the TX Mode Change key
repeatedly until the Digital Transmit
icon (
) is displayed.
2. Check that the correct talk group ID
is selected.
3. Ensure that the channel is clear.
4. Press and hold the push to talk key
(PTT). The Transmit/Receive LED
will light red while transmitting.
5. Hold the microphone approximately two inches from your mouth and speak in a
clear, normal voice. Keep the PTT switch pressed until you have finished speaking.
6. Release the PTT switch to return to standby mode and receive any reply.
4.1.5.3 Encrypted Transmissions
1. Press the TX Mode Change key
repeatedly until encrypted transmit
mode is displayed. Depending on
channel programming, the
encrypted transmit mode may
display the Digital DES Transmit
icon (
) or Digital AES Transmit
icon ( ).
2. Check that the correct talk group ID
is selected.
3. Ensure that the channel is clear.
4. Press and hold the push to talk key
(PTT). The Transmit/Receive LED
will light red while transmitting.
5. Hold the microphone approximately two inches from your mouth and speak in a
clear, normal voice. Keep the PTT switch pressed until you have finished speaking.
6. Release the PTT switch to return to standby mode and receive any reply.
Figure 4.14 – Digital transmit display
Figure 4.15 – Encrypted transmit display