Magnadyne Extreme Series X9 - Manual (Page 14)

This wire will provide a 1 second pulse
ground when Channel 3 is activated. The
current capacity of this wire is 200mA.
This feature allows you to remote control
trunk release or other electric device. An
additional relay may be required.
GM VATS Key Override Using ALA985H Relay:
The Violet/Black wire is a programmable (-) output wire that operates when channel #4 is activated with the
remote transmitter. The output of the wire has five different output timer settings to suit any application.
The output current of the Violet/Black is 200mA and can control (1) 30A Bosch type 12 volt relay. (See Alarm
Feature Programming Group 3. The default timer setting is “Pulsed” ground)
GM VATS Key Override Using ALA984 Relay (may also use optional RS-PLM bypass module):
14
Wiring (continued)
87
87A 85 86
30
To Ignition
Passkey Wire
Computer Side
Orange or Black Plastic Tube
at Steering Column
Resistor
Cut
Passkey Wire
Key Side
White
6-Pin
Connector
Pink Wire
HC4 White 20-Pin Connector
(continued)
Pink Wire: 200mA Ignition #3 Output (Programmable Operation) (continued)
Resistor
Yellow
Trucks: Orange/Black or Cars: Black
87
87A 85
86
30
To Vehicle's Ignition Wire
Trucks: Red/White or Cars: White
Pink Wire
White
6-Pin
Connector
Violet/Black Wire: (-) 200mA Channel 4 Output
87
87a
86 85
30
Red/White
Wire
Input to Relay (+ or -)
Output to Power
Trunk Switch
White 6-Pin
Connector
Constant + 12 Volts
Red/White Wire: Channel 3 (Trunk Release) Output