Magnadyne Extreme Series X9 - Manual (Page 21)

21
Alarm Feature Programming (Group 3) (continued)
Before 15 seconds has passed, push and release the
valet switch 8 times holding the button down on the
8th press. Wait until four (4) short chirps/beeps + one
(1) long chirp/beep is heard. Release the button. You
are now in “Remote Start Feature Programming”
mode.
ON
O F F
3X 7X + 1X (Hold)
Examine the 2 feature charts enclosed and decide which features will get changed. Circling the feature to be
changed will make the programming process much easier to perform.
With the ignition switch in the OFF position, Turn the
ignition switch On - Off - On - Off - On - Off
Remote Start Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep repressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the
next feature.
O F F
Turn On the Ignition
3 long chirps & 3 flashes of the
parking lights will confirm exit of
the programming mode. Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode. Step 4 Exit Programming
Remote Start Feature Programming
Step 1 Step 2
Step 3
One Chirp Two Chirps Three Chirps Four Chirps
Button One LED Pulse Two LED Pulses Three LED Pulses Four LED Pulses
(Default Setting)
Diesel Engine and
10 Second
Warm-Up Timer
Gasoline
Engine
Five Chirps
Five LED Pulses
Diesel Engine and
15 Second
Warm-Up Timer
Diesel Engine and
20 Second
Warm-Up Timer
Diesel DBI