Magnadyne Extreme Series X9 - Manual (Page 18)

18
One Chirp Two Chirps Three Chirps Four Chirps
Button One LED Pulse Two LED Pulses Three LED Pulses Four LED Pulses
(Default Setting)
Remote Feature Programming
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
All Chirps On Siren Only Horn Only All Chirps Off
Automatic Arming without
Automatic Door Locking
Automatic Arming
Automatic Door Locking
Manual Arming
Automatic Rearm Off Automatic Rearm On
Instant Door Ajar
Error Chirp
45 Second Delay
Door Ajar Warning
+
Normal Function
Horn Output
Horn Output for Alarm
Trigger, Panic and
Car-Finder Only
+
Normal Horn Output
Pulse Duration
PVID 1 Horn Output
S-S-S - L-L-L - S-S-S
PVID 2 Horn Output
S-L-S-L
PVID 3 Horn Output
S-S-S-L
PVID 4 Horn Output
S-M-L-S-M-L
PVID 5 Horn Output
S-S - L - S-S
Five Chirps
Five LED Pulses
Six Chirps
Six LED Pulses
Note: Horn output settings are valid for the
Brown wire and the White/Black wire when
they are programmed to operate as Horn
output.
+
Car-Jack Mode is Off
Manual Car-Jack
Mode is On
Automatic Car-Jack
Mode is On
O F F
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Alarm Feature Programming (Group 1) (continued)
Step 3
Step 5 Exit Programming