Magnadyne Extreme Series X9 - Manual (Page 27)

27
Turn the ignition switch from the
OFF position to the ON position 3
times leaving it in the Off position
the third time.
ON ON
3X
Step 1
Before 15 seconds has passed, push
and release the valet switch 12 times.
Holding on the 12th press. You will
hear 6 short beeps. Release the
button.
11X + 1X (Hold)
Step 2
Press and release the (Trunk) button
first, then press (Lock) and (Trunk)
button on the transmitter together for
5 seconds, there will be a six chirp
confirmation with 3 long chirps and 3
parking light flashes to confirm the
system “Start Features 1 and 2
Programming” all returned to the
factory default settings.
Step 3
ON
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Step 4: Exit Programming
Returning Programmable Alarm Features to Factory Default Settings
Turn the ignition switch from the
OFF position to the ON position 3
times leaving it in the Off position
the third time.
ON ON
3X
Step 1
Before 15 seconds has passed, push
and release the valet switch 12 times.
Holding on the 12th press. You will
hear 6 short beeps. Release the
button.
11X + 1X (Hold)
Step 2
Press (Lock) and (Trunk) button on
the transmitter together for 5 seconds,
there will be a six chirp confirmation
with 3 long chirps and 3 parking light
flashes to confirm the system “Start
Features 1 and 2 Programming” all
returned to the factory default
settings.
Step 3
ON
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Step 4: Exit Programming
Returning All Programmable Features to Factory Default Settings
5 Sec Hold