Siemens Xelibri 3 - Manual (Page 20)

19
Features and Settings
Ring tones
To switch off ring tones
From the Audio menu, choose Ringer setting.
Switching off ring tones won’t affect the vibrating alarm
(p 22) or alarm clock (below).
To change ring tones
You can use different ring tones for callers you recognise
and for messages.
From the Audio menu, choose Ringer melodies.
Choose the type of call you want to modify:
• General calls – new or unknown numbers
• Phonebook callers – numbers that appear in your
Phonebook
• Messages – incoming text messages.
Click
to choose the melody and choose Select.
You can also save ringer melodies from EMS messages
(p 18).
Modify ringer volume using the Audio menu (p 22).
Using the alarm clock
Your XELIBRI provides a daily alarm that works even
with the phone switched off.
To set the alarm
From the Clock menu, choose Alarm clock.
Choose Change and either:
• confirm the time (if shown) by clicking
, or
• enter the time (24 hour clock) at which you want to be
alerted. Click to delete a digit. Choose OK to set
the alarm.
To switch off the alarm, choose Change again.
When the alarm’s set, you’ll see y next to the time.
When you hear the alarm…
Click to cancel. The alarm will sound at the same time
tomorrow unless you switch it off (above).
Switching off ring tones won’t affect the alarm.
Using a screensaver
Your XELIBRI displays an image (e.g., a clock) when it
has been idle for a couple of minutes. To change the
image, from the Settings, Display menu choose
Screensaver and select the image you want.
this icon on the
screensaver display
indicates you have a
new message, missed
call, etc.
Ô
Network µ
Ò
shakara.book Seite 19 Montag, 24. Februar 2003 4:33 16