Siemens Xelibri 3 - Manual (Page 5)

Getting Started
4
To switch on watch...
Hold down . The first time, you’ll be asked to set the
time (see below).
... then to switch on phone
With the clock visible on the display, double-click .
Enter your PIN number (if required).
‘Typing’ numbers on your XELIBRI
Instead of number keys, your XELIBRI has a virtual
keypad.
When you enter numbers, you’ll see small arrow-shaped
indicators above and below the line on the display:
To enter a number
Click (or hold) to scroll up or down the list of
numbers. When you reach the correct digit, pause. Your
XELIBRI writes it on the display. Repeat for the next
number.
You can also write the special characters *, # and +.
These appear after the numbers in the list.
To correct a number
Click to delete the previous digit. Hold down to delete
all preceding digits.
Setting the time and date
When you first use your XELIBRI, set the time and date
at the prompts.
Use the
keys to set the time (using 24 hour clock),
and date (using day.month.year), preceding a number
with a zero if it is less than 10.
Click
to set.
Т
а
Ш d
012
<C Options
shakara.book Seite 4 Montag, 24. Februar 2003 4:33 16