Mitel SX-200 - Manual (Page 14)

5312/5324 IP Phones User Guide
MAKING AND ANSWERING CALLS
If your telephone system operates as a private branch exchange (PBX), the Prime Line can be used
for both incoming and outgoing calls. Outgoing calls on a PBX system require dialing a line access
code (usually 9) followed by the telephone number. In a key telephone system (KTS), the Prime Line
is used for internal (Intercom) calls only. Outgoing calls require the use of Line keys.
Make a Call - PBX
1. Lift the handset.
2. Do one of the following:
• Dial the extension number or a line access code (usually 9) and the telephone number for an
outside call.
• Press a Speed Call key.
Make an External Call - KTS
1. Lift the handset.
2. Press a Line key.
3. Do one of the following:
• Dial the telephone number.
• Press a Speed Call key.
• Press
(REDIAL).
Make an Intercom Call - KTS
An Intercom call is a call between two extensions which either pages or rings the called extension.
To switch between a ringing intercom call to a paged intercom call:
1. Make a call.
2. Do one of the following while listening to ringback tone:
• Press the Direct Page feature key.
• Dial
*48.
Answer a call
Do one of the following:
• Lift the handset.
• Press
( SPEAKER ).
• Press the flashing Line appearance key and lift the handset.
• Press the flashing Line appearance.
• Note: The Auto-Latch Microphone feature described elsewhere in this guide allows you to
answer and respond to internal calls handsfree.
8