Mitel SX-200 - Manual (Page 27)

5312/5324 IP Phones User Guide
To retrieve a call parked in a specific orbit:
• While listening to dial tone, dial *57 followed by the park orbit number.
To park a call in a specific orbit using an Orbit # feature key:
• Press a free (unlit) Orbit # feature key. (See "Feature Key" for instructions on programming a
feature key.)
Once a call is parked, you can press the same Orbit # to initiate a page.
To retrieve a call parked using an Orbit # feature key:
• Press the flashing Orbit # feature key.
Call Park - Destination Phone
Call Park - Destination Phone allows you to park an answered call on another phone. If a parked call
is not retrieved after a specified length of time, a reminder occurs.
To park an active call on another phone:
• Press (TRANS/CONF) to get dial tone.
• Dial *62, and then dial the extension of the destination phone.
If the call is parked successfully, dial tone, busy tone or a page occurs. If the call is not parked,
reorder tone occurs.
To retrieve a call parked on another phone:
Do one of the following:
• Press the flashing Call Park feature key.
• Dial
*22.
Call Pickup
To answer a call that is ringing at another phone in your Pickup Group:
1. Lift the handset.
2. Press the Pickup feature key.
To answer a call that is ringing at a station not in your Pickup Group:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Dial the number of the ringing station.
21