Mitel SX-200 - Manual (Page 28)

5312/5324 IP Phones User Guide
Campon
To Campon to a busy station:
• Press
the Campon feature key or the Wait softkey.
To retrieve a call when you hear Campon tone:
• Press
the Swap/Trade feature key or the Trade softkey.
Do Not Disturb
To activate or deactivate Do Not Disturb:
• Press
the Do Not Disturb feature key. The key flashes to indicate that Do Not Disturb is
active.
Override
To use Override when you encounter busy or Do Not Disturb tone:
• Press
the Intrude feature key.
Paging - PA
To use Paging:
1. Lift handset.
2. Do one of the following:
• To page the default zone, press the PA Page feature key.
• To page a specific zone, dial *13 followed by the zone number (0-9).
3. Make the announcement.
Paging - Direct
Direct Paging allows you to page a party through the party’s handsfree speaker. If the paged party
has Auto-Latch Microphone enabled, the page can be heard even when the party is on a handset or
headset call. If the paged party has Handsfree Answerback enabled, your page automatically
establishes a handsfree call with the paged party.
To page a party:
1. Lift the handset.
2. Press the Direct Paging feature key or dial the appropriate feature access code.
3. Dial the extension number.
4. Speak to the dialed party after the tone.
Note: If the phone you are paging has the "Can Be Paged" feature turned off, you hear a busy tone
and the direct page cannot be connected.
How you answer a Direct Page depends on whether you have Handsfree Answerback to a Direct
Page enabled on your phone. See Handsfree Answerback to a Direct Page elsewhere in this guide.
22