Ingersoll-Rand 7120 - Manual (Page 70)

OPTIONS
7/120 (P425AWIR), 9/110 (XP375AWIR), 10/105 (HP375AWIR), 14/85 (VHP300AWIR),
7/170 (P600WIR), 10/125 (HP450WIR), 14/115 (VHP400WIR)
67
OPTIONS – Lubricator
(For units manufactured in North America)
SAFETY
WARNING: Ensure that the lubricator filler cap is
re–tightened correctly after replenishing with oil.
WARNING: Do not replenish the lubricator oil, or service
the lubricator without first making sure that the machine is
stopped and the system has been completely relieved of all
air pressure (Refer to STOPPING THE UNIT in the
OPERATING INSTRUCTIONS section of this manual).
CAUTION: If the nylon tubes to the lubricator are disconnected
then ensure that each tube is re–connected in its original
location.
GENERAL INFORMATION
Oil capacity:
1 QT Option –0.95 Litre (1qt)
2 QT Option –1.9 Litre (2qts)
Oil specification:
Refer to the Tool Manufacturer’s Manual.
OPERATING INSTRUCTIONS
COMMISSIONING
Check the lubricator oil level and fill as necessary.
PRIOR TO STARTING
Check the lubricator oil level and replenish as necessary.
MAINTENANCE
Check the lubricator oil level and replenish as necessary.
FAULT FINDING
FAULT CAUSE REMEDY
No oil flow. Incorrect connection. Reverse the nylon
tube connections to
the lubricator.