Connecting a satellite, cable, Terrestrial set-top box, or other video source, Connecting the av controller —continued – Integra DHC-9.9 User Manual
Page 36
36
With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
via the AV controller, which is useful if your TV has no audio outputs.
• With connection
, you can listen to and record audio from the video source or listen in Zone 2 or Zone 3.
• To enjoy Dolby Digital and DTS, use connection
or
. (To record or listen in Zone 2 or Zone 3 as well, use
and ,
or
and .)
Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
Connection
AV controller
Signal flow
Video source
COMPONENT VIDEO IN 3
⇐
Component video output
CBL/SAT IN S
⇐
S-Video output
CBL/SAT IN V
⇐
Composite video output
CBL/SAT IN L/R
⇐
Analog audio L/R output
DIGITAL COAXIAL IN 3 (CBL/SAT)
⇐
Digital coaxial output
DIGITAL OPTICAL IN 2 (CD)
⇐
Digital optical output
Hint!
Step 1: Video Connection
Choose a video connection that matches the video source (
,
, or
)
, and then make the connection.
If you use connection
, you must connect the AV controller to your TV with the same type of connection.
A B
C
A
Step 2: Audio Connection
Choose an audio connection that matches the video source (
,
, or
), and then make the connection.
a
b
c
a
b
c
a
b
a
c
A
B
C
a
b
c
Y
COAXIAL
OUT
P
B
COMPONENT VIDEO OUT
P
R
S VIDEO
OUT
AUDIO
OUT
VIDEO
OUT
L
R
OPTICAL
OUT
b
c
A
B
C
B
a
C
Satellite, cable, set-top box, etc.
Connect one or the other
Connection
must be assigned (see page 53)
c