Integra DHC-9.9 - Manual (Page 59)

59
First Time Setup
—Continued
Using Audyssey MultEQ
®
XT
+
-
On Standby
TV
Input
TV CH
TV VOL
--/--- 10 11 12
D.TUN
+10 0 Clear
1 2 3
4 5 6
7 8 9
Input Selector
VCR/DVR CBL/SAT DVD
Tape Tuner CD
Phono
Game/TV
Macro
1 2 3
VCR DVD
CDR/MD
CD Zone 2
Remote Mode
Dimmer
Tape/AMP
Sleep
Receiver TV Dock Cable
VOL
CH
Disc
Album
+
-
Enter
Top Men u Men
u
Display Muting
Exi t Gu ide
Prev
CH Ret urn Setu
p
Listening Mode
Playlist Random Rec
Stereo Surround
SAT
Zone 3
AUX 1 AUX 2
Enter
,
Setup Mic
1
2, 11
Notes:
• If the AV controller is muted, it will be unmuted
automatically when the automatic speaker setup
starts.
• Automatic speaker setup cannot be performed
while a pair of headphones is connected.
• It takes about 15 minutes to complete the auto-
matic speaker setup for three positions. Total mea-
surement time varies depending on the number of
positions and speakers.
• Do not disconnect the speaker setup microphone
during the automatic speaker setup, unless you
want to cancel the setup.
• Do not connect or disconnect any speakers during
the automatic speaker setup.
The onscreen menus shown in this manual may be
slightly different from what you see on your TV.
1 Turn on the AV controller and the
connected TV.
On the TV, select the input to which the
AV controller is connected.
2 Place the speaker setup micro-
phone at measurement point
1
(page 58), and connect it to the
Setup Mic jack.
Notes:
• Before starting Audyssey MultEQ
®
XT
Automatic Speaker Setup, arrange
the room and connect the speakers as
you would for enjoying movies.
Changes to the room after auto setup
requires you run the auto setup again,
as room EQ characteristics may have
changed.
• When starting the automatic speaker
setup, do not stand between the
speakers and microphone, and avoid
obstacles blocking the path between
speakers and microphone. This will
produce inaccurate results.
• Position the microphone at ear height
of a seated listener with the micro-
phone tip pointed directly at the ceil-
ing using a tripod. Do not hold the
microphone in your hand during
measurements as this will produce
innacurate results.
• Make the room as quiet as possible.
Background noise can disrupt the
room measurements. Close win-
dows, silence cell phones, televi-
sions, radios, air conditioners,
fluorescent lights, home appliances,
light dimmers, or other devices.
• Cell phones should be turned off or
placed away from all audio electron-
ics during the measurement process
as Radio Frequency Interference
(RFI) may cause measurement dis-
ruptions (even if the cell phone is not
in use).
Auto Speaker Setup
Please place microphone at center of listening area at
ear height.
Next
ENTER ENTER
1