Intermec 6110 - Manual (Page 102)

GLOSSARY
Glossary-18 6110 Series Hand-Held Computer User’s Guide
RTC (Real Time Control) Protocol (ADK)
A sophisticated multiplexing system using contention rules
to open communication yielding faster and more efficient
use of the radio channel.
RTS (Request To Send or Ready To Send)
A modem control signal on a standard RS-232-C connector
that puts the modem in originate mode to start sending
data.
RXD
Received Data.
SanDisk
A brand of flash memory card. (See also: ATA Card, Flash
Card, Spinning Media, or Hardcard)
Scroll
To move through text or graphics (up, down, left, or right)
to see parts of the window not shown onscreen.
Serial Interface
An interface in which the terminal or computer sends single
bits of information to the other device, one after another.
Serial Lid
A cap for the 6100 Computer which contains various
communications capabilities.
Set (SNMP)
A basic SNMP PDU operation that lets a management
station tell an agent to change a value that agent stores. A
way to manipulate management information.
SG
Signal ground.
Single Frequency
If a wireless station is using a single frequency, it operates
on the selected frequency in a list of frequencies. The
default is the first frequency in the list.