Intermec 6110 - Manual (Page 32)

SECTION 2 Operation
2-8 6110 Hand-Held Computer User’s Guide
Removing the Main Battery
The following steps on pages 2-8 and 2-9, detail how to
remove the main battery, check how much power the bat-
tery contains, and replace the battery pack.
" NOTE: If you are using Windows 95, ensure that you shut down that opera-
tion before removing the battery pack. Otherwise, your computer will
treat this as a crash.
1. Press and hold down on the Release Button (see
Figure 2-6, Figure 2-7 and pages 2-8, and 2-9, for
battery compartment details). This causes your com-
puter to go into a suspend mode and makes sure you
do not lose your data.
2. Slide the Battery Latch towards the release button
and remove the battery.
3
1
2
Figure 2-6
Removing the Main Battery Pack
11
Battery Pack
Battery Latch