Intermec 6110 - Manual (Page 75)

APPENDIX B PEN*KEY R Utilities Program
6110 Hand-Held Computer User’s Guide B-21
Option 3 UNIT ID
If you select this option, the “Change Unit ID” pop-up menu
appears:
UNIT ID 2233233
WORKGROUP
6200IPL
[F4]RESET FACTORY
[ESC]QUIT
CHANGE UNIT ID
Enter up to eight characters to change the Unit ID. Use the
[¬SP] key to backspace and use the [CLR] to restore the
previous ID. Press the [ENT] key to save the new ID and
return to the “Communications Settings” menu. Press the
[F4] key to reset the ID to factory default. Press [ESC] to
exit this pop-up menu.
Option 4 NETWORK PARAMETERS
Network Parameters appears as Option 4 when Option 2.
COMM SETTINGS is set to one of these three NETWORK
options: NRINET, TFTP, or NOVELL NETWARE.