Removing pc cards – Intermec 6110 User Manual
Page 37
Advertising
SECTION 2
Operation
6110 Hand-Held Computer User’s Guide
2-13
Removing PC Cards
The PC card compartment contains ejector buttons for re-
moving the cards from the slots (see Figure 2-9 for location).
The bottom slot also has a plastic latch called an ATA latch,
which retains the card in the slot. This latch must be
pressed before you can remove the card from the slot. The
latch is to prevent the card which contains the Operating
System from being removed accidentally.
Figure 2-9
Individual PC Card Slot Ejector Buttons
Individual Slot
Ejector Buttons
ATA Latch
Press in on the ejector button to release and eject the card.
The button will eject the card far enough so you can pull it
the rest of the way with your fingers.
Advertising