Intermec 6110 - Manual (Page 71)

APPENDIX B PEN*KEY R Utilities Program
6110 Hand-Held Computer User’s Guide B-17
These error codes apply when COMM SETTINGS is set to
TFTP:
“0” No error.
“1” PSROB0C.EXE could not be loaded.
“6” User aborted communications by pressing
[ESC] key.
“100” TCP/IP kernel is missing.
“101” Invalid client IP address. Ensure the entry for
CLIENT IP ADDRESS is correct or ensure the
DHCP server is running.
“201” TFTP.EXE failed.
“202” TFTP.EXE not found.
“203” Unknown server.
“204” Remote file name is invalid.
“205” Local file name is invalid.
“206” File not found on server.
“207” Timeout.
Option 2 COMM SETTING
If you select this option, the “Communications Settings”
drop-down list appears:
1. NETWORK. . .
2. MODEM/DIRECT
3. ACCESSORY CARD
4. HANDHELD
5. REMOTE OPS
6. INTERSERVER
Press the number of a communications settings, or press
the Y or B keys to scroll through the list, then press the
[ENT] key to enter.