Insignia X7510 - Manual (Page 150)

150 Getting Connected
10.4 Starting a Data Connection
After setting up a data connection such as G/GPRS or ISP dial-up on your
device, you can now connect your device to the Internet. The connection
is started automatically when you begin using a program that accesses the
Internet such as Internet Explorer® Mobile.
To manually start a data connection
If you have set up multiple types of data connections on your device, you can
manually start a connection.
1. Tap Start > Settings > Connections tab > Connections.
2. Tap Manage existing connections.
3. Tap and hold the name of the desired connection, then tap Connect.
To disconnect active data connections
1. Tap Start > Settings > Connections tab > Comm Manager.
2. Tap the Data Connection button ( ).
Note You cannot reconnect a data connection in Comm Manager.
10.5 Internet Explorer® Mobile
Internet Explorer® Mobile is a full-featured Internet browser, optimized for
use on your device.
To open Internet Explorer® Mobile
• Tap Start > Internet Explorer.
To go to a Web site
• Enter the Web site address in the address bar, then tap .
To view a Web page using finger scrolling and panning
• Slide your finger upward to scroll down the Web page, or slide your
finger downward to scroll up the Web page.
• To pan downward, tap and hold on the screen, then drag your finger
upward. To pan upward, tap and hold on the screen, then drag your
finger downward.