Insignia X7510 - Manual (Page 161)

Getting Connected 11
4. Tap Next.
5. Tap Finish. You can now exchange information with the paired
device.
Tips • To rename a Bluetooth partnership, tap and hold the partnership’s name on
the Devices tab of the Bluetooth screen, then tap Edit.
• To delete a Bluetooth partnership, tap and hold the partnership’s name on
the Devices tab, then tap Delete.
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations, you can use a Bluetooth hands-free
headset such as a car kit with your device. Your device also supports ADP
(Advanced Audio Distribution Profile) which allows you to use a Bluetooth
stereo headset for hands-free phone conversations and for listening to stereo
music.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your device and the Bluetooth headset are
turned on and within close range, and that the headset is visible.
Refer to the manufacturer’s documentation to find out how to set the
headset in visible mode.
2. Tap Start > Settings > Connections tab.
3. Tap Bluetooth > Devices tab > Add new device. Your device displays
the names of other Bluetooth devices within range.
4. Tap the name of the Bluetooth
headset, then tap Next. The device
will automatically pair with the
Bluetooth headset.
Note Windows Mobile will
automatically try one of the
preconfigured passcodes (0000,
1111, 8888, 1) to pair the
Bluetooth headset with the
device. If this fails, you have to
enter the passcode delivered with
your headset manually.
5. Tap Done, then tap the Bluetooth headset name in the Devices tab.