Insignia X7510 - Manual (Page 43)

Getting Started 
Connections tab
Icon Description
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan
for other Bluetooth devices.
Comm Manager Manage your device’s connections (including G/GPRS,
Wi-Fi, Bluetooth, and ActiveSync), turn the phone on or off, and enable or
disable the Direct Push function.
Connection Setup Configure your device’s data connections, such as G/
GPRS, WAP, and MMS, based on the detected or selected network operator.
See Chapter 10 for details.
Connections Set up one or more types of modem connections for your
device, such as phone dial-up, G/GPRS, and more, so that your device can
connect to the Internet or a private local network.
CSD Line Type Set the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
Domain Enroll Enrol your device with your company’s domain to access
company resources.
GPRS Setting Set the GPRS authentication method.
SMS Service Enables sending of SMS text messages via a data
connection, such as GPRS or a circuit-switched connection.
USB to PC Select the type of USB connection between your device and
your PC.
Wi-Fi Scan for available wireless networks.
WLAN Display information about the active wireless network and
customize Wi-Fi settings.