Compressor operation checklist, Cylinder prefill inspection (figure 1) – Invacare IRC5LXO2 User Manual

Page 59

Advertising
background image

11

PART

TWO

This Procedure includes the following:
Compressor Operation Checklist
Cylinder Prefill Inspection
Connecting the Cylinder to the Compressor
Turning the Compressor On
Removing the Cylinder
Setting the Flow Knob to the Prescribed Setting

COMPRESSOR OPERATION CHECKLIST

Each time the HomeFill II Compressor is used to fill a cylinder,

complete the following checklist:
NOTE: All steps mentioned below are in this procedure, unless otherwise noted.

Ensure the concentrator has been on for at least thirty (30)

minutes. Refer to the concentrator owner’s manual, Part One.

Perform the prefill inspection on the cylinder.

Connect the cylinder to the compressor.

Turn the compressor on.

Examine the indicator lights on the control panel.

Remove the full cylinder.

Turn the compressor off.

If filling another cylinder, repeat this checklist.

CYLINDER PREFILL INSPECTION

(FIGURE 1)

WARNING

ONLY use cylinders that have the Invacare Venture

HomeFill II connection and the label shown in FIGURE 1.
All cylinders must be inspected before attempting to

fill: otherwise, injury or damage may occur.

COMPRESSOR OPERATION

PROCEDURE 3

Advertising