A1 icp-hd-3(-nd) cpu extension, A1.1 icp-hd-3(-nd) front-panels (8hp or 12hp), Figure a1.1 icp-hd-3(-nd) cpu front-panels – Inova PD00941013.001 User Manual

Page 60: A1 icp-hd-3(-nd) cpu extension .. a-2, Icp-hd-3, Appendix a a1 icp-hd-3(-nd) cpu extension

Advertising

Page A-2

ICP-PM/CM Appendix-A

ICP-HD-3

Appendix A

A1 ICP-HD-3(-ND) CPU Extension

Combined PS-2 mouse / keyboard, USB (2.0), COM ports, LPT, mass storage and slim-line FD
interfaces are supplied on the ICP-HD-3(-ND) - a CPU add-on board. Two versions exist - one is
supplied with a hard disk and one without. Both versions are functionally identical. The name
extension ‘-ND’ refers to the No Disk version!

All communication between the ICP-HD-3 and the host CPU is performed via rigid board connec-
tors - there aren’t any flex cables on the CPU board itself! This concept eliminates the risk of
incorrect device installation and ensures both mechanical and electrical stability.

A1.1 ICP-HD-3(-ND) Front-Panels (8HP or 12HP)

The Inova ICP-HD-3(-ND) interface is a mass-storage carrier board that is only available as a CPU
plug-in device with either an 8HP or 12HP front-panel as illustrated in figure A1.1.

Figure A1.1 ICP-HD-3(-ND) CPU Front-Panels

RST

VIDEO

ETH 1

USB

ETH 2

PS/2

COM 1

COM 2

LPT 1

USB

RST