Inova PD00941013.001 - Manual (Page 66)

©2004 Inova Computers GmbH Page A-8 ICP-PM/CM Appendix-A
ICP-HD-3 Appendix A
A2.4 EIDE Interface
Standard to all ICP-HD-3 carrier board modules is the 3.5” EIDE hard-disk header. This has a
standard (commercial PC) pinout and requires no further mention here.
Note:
To conform with the UDMA 66 (or
higher) standards, only suitable,
commercially available 80-strand
ribbon cable should be used. Failure to
do so may result in data transmission
errors or even cause the CPU to crash!
A2.5 Slim-Line Floppy Disk Interface
Standard to all ICP-HD-3 carrier board modules is the slim-line floppy disk header. This has a
standard (commercial PC) pinout and requires no further mention here.