Innotek Automatic No-bark Collar BC-50E - Manual (Page 3)

D. Adapter (BC-200E only) - Recharges the collar receiver's sealed long-life battery. The charger can be
plugged into any regular home wall socket (220 VAC, 50Hz).
E. Receptacle cover (BC-200E only) – Fits tightly into the collar receiver’s charging receptacle. Keeps out
water and dirt. Always keep the receptacle cover in place when the unit is not being charged.
HOW THE NO-BARK COLLAR WORKS
When properly positioned on your dog, the No-Bark Collar will detect the vibrations from your dog's vocal
cords when it barks, howls, or growls. These vibrations are monitored by sophisticated signal processing
software that applies stimulation only when barking occurs. The vibration-sensing function is unaffected by
normal dog activities.
Unlike other anti-bark collars, the INNOTEK Free Spirit No-Bark Collar has no awkward switches or dials. Just
power it up and put it on your dog according to instructions.
When the unit detects vibration from barking, it administers a brief stimulation. A safety control quiet period
(no barking) of two seconds immediately follows, before additional stimulations are administered. As the dog
continues to bark, the stimulation increases in intensity to the appropriate level for the dog’s temperament.
Your new INNOTEK No-Bark Collar features progressive stimulation levels, Level 1 (lowest) to Level 7
(maximum). With our patented* Auto-Set technology, the No-Bark Collar automatically sets itself at the
appropriate stimulation level that quiets your dog. When your dog first barks, he receives a Level 1
stimulation. A two-second learning timeout follows, to give
your dog a chance to associate the bark with the stimulation.
If your dog barks again, he will receive a Level 2 stimulation,
followed by another timeout. The collar’s Auto-Set design
automatically increases the stimulation through as many as
seven levels until your dog stops barking.
The INNOTEK No-Bark Collar protects your dog from over-
stimulation. Let’s say that your dog stops barking after
receiving a Level 4 stimulation. After a 5-minute bark-free
period, the No-Bark Collar automatically sets the next
stimulation down one level, in this case Level 3, (one level
below the highest level previously reached). At its next bark, the dog would receive a Level 3 stimulation, a
"warning level" that it should recognize.
The Auto-Set feature is fair to the dog. Should it stop barking at the warning level, it could soon wean itself
down to the lowest level of stimulation. If it barks through the warning level, the stimulation will increase to
higher levels until the dog stops barking. Your dog will soon learn that the best way to avoid stimulation is
to stay quiet. (Some dogs learn faster than others, so be patient.) Used properly, the No-Bark Collar will
quickly quiet your companion of intermittent nuisance barking.
Sometimes you want your dog to be able to bark, of course. If your dog has a protective role in your home,
simply take the No-Bark Collar off him when you want him to be free to bark.
3
1
2
3
4
5
6
7
=Barking
Levels
Time
5 minutes
Auto-Set Stimulation
2100244-2_bc-50_200e.qxp 11/11/2005 9:31 AM Page 3