Insignia NS-HT511 - Manual (Page 18)

14
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
3 Press or to select Send Wireless Audio,
then press ENTER. The Send Audio menu opens.
4 Press or to select the Sender you want
(Front, Surround, or Subwoofer), then press
or to Enable or Disable the selected sender.
Establishing communications with other Rocketboost
devices
To connect to a Rocketboost wireless network:
1 Press the Power button on your surround sound
receiver to turn it on.
2 Press SETUP. The Setup Menu opens.
3 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
4 Press or to select Hub (Manager), then
press ENTER, then press or to select
Enable or Disable.
If you are setting up your network for the first
time, choose one of your Rocketboost senders
to be your hub. If you want the surround sound
receiver to be the hub then set the Hub
(Manager) setting in this menu to Enable.
If you already have a Rocketboost network
established, set the Hub (Manager) setting in
this menu to Disable.
5 Press RETURN to go to the previous menu.
6 If possible, bring your existing Rocketboost Hub
device, or the new Rocketboost device to which
you’d like to join, into the same room as the
soundbar.
7 Press the Power button on your other
Rocketboost device to turn it on.
8 Press and hold the Power button on your other
Rocketboost device for more than three seconds
to put it into joining mode. The power indicator
starts blinking rapidly and the unit will stay in
joining mode for 30 seconds.
9 Press or to select Connect to Wireless
Network, then press ENTER.
10 The display on your surround sound receiver
shows “Connecting.” When connected to your
other Rocketboost device, the display shows
“Connected.”
Sender Signal Status
Front Enabled Front is ON
Front Disabled Front is OFF
Surround Enabled Surround signal is ON
Surround Disabled Surround signal is OFF
Subwoofer Enabled Subwoofer signal is ON
Subwoofer Disabled Subwoofer signal is OFF
Note
• The Front sender should be enabled if you want
to send the front left/right audio signals to other
Rocketboost receivers (for example
Rocketboost headphones or Rocketboost
receiver products in other rooms of your house).
• We recommend that you do not enable
channels that you will not be using.
Note
Every Rocketboost ™ network must contain a device
called a Hub, which directs network data traffic and
helps devices join the network. The network can
have only one hub. If you are setting up your network
for the first time, choose one of your Rocketboost
™
senders to be your hub. If you already have a
Rocketboost™ network, then set the Hub (Manager)
setting to Disable.
Send Audio
Front
Surround
Subwoofer < Enabled >
Enabled
Enabled
[< >] to Enable/Disable
Setup Menu
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Rocketboost
Note
Every new Rocketboost device you add to your
Rocketboost network must be “joined” to your
Rocketboost hub device. If the surround sound
receiver is the Hub of your network then repeat the
following steps for each of your Rocketboost devices
on your network.
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub (Manager) Enable
Hub Enable
Hub Status < Enabled >
[< >] to Enable/Disable
NS-HT511_11-0310_MAN_.book Page 14 Wednesday, April 13, 2011 11:12 PM