Insignia NS-HT511 - Manual (Page 28)

24
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
Setting up HDMI (HDMI Setup menu)
CEC Function (HDMI Control submenu)
This function lets CEC-compatible components
connected via HDMI to be controlled by the
receiver.
HDMI Through
• Off (default)–HDMI Through is off.
• Auto–Detects the signal and automatically
selects the input source.
• BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD– Selects the input source for which the
HDMI Through function is enabled.
• Last–The HDMI Through function is activated on
the input source selected when the AV receiver is
set to Standby mode.
When enabling the HDMI Through function,
regardless of whether the AV receiver is On or in
Standby, both the audio and video streams from an
HDMI input will be output to the TV or other
components via the HDMI connection. The HDMI
THRU and HDMI indicators light when this is
enabled. This setting is set to Auto automatically
when the above CEC Function is set to On.
Audio TV OUT (Audio TV Out submenu)
This setting determines whether audio received by
HDMI IN is output by the HDMI OUT. You may want
to turn this preference on if your TV is connected to
the HDMI OUT and you want to listen to the audio
from a component that’s connected to an HDMI IN,
through your TV’s speakers. Normally, this should
be set to Off.
Audio Return Ch (ARC)(Audio Return Ch submenu)
The audio return channel (ARC) function enables an
HDMI 1.4-capable TV to send the audio stream to
the HDMI OUT jack of the receiver. To use this
function, you must select the TV/CD input and your
TV must support the ARC function.
LipSync (LipSync submenu)
Lets you set the receiver to automatically correct
any delay between the video and the audio, based
on the data from the connected monitor.
• To enable, set to ON.
Submenu Configuration
CEC Function
Off (default)–CEC disabled.
On–CEC enabled.
HDMI Through
Off (default)–HDMI Through is off.
Auto–Detects the signal and automatically selects
the input source.
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD–
Selects the input source for which the HDMI Through
function is enabled.
Last–The HDMI Through function is activated on the
input source selected when the AV receiver is set to
Standby mode.
Audio TV OUT
Off (default)–HDMI audio is not output.
On–HDMI audio is output.
Audio Return Ch (ARC)
Off–Select if you don’t want to use audio return
channel (ARC) function.
Auto (default)–The audio signal from your TV tuner
can be sent digitally to the HDMI OUT of the receiver.
LipSync
On (default)–Lip sync enabled.
Off–Lip sync disabled.
Notes
• When set to On, the name of connected
CEC-compatible components and CEC On are
displayed on the receiver when the menu is
closed.
• When set to Off, CEC Off is displayed on the
receiver when the menu is closed.
• When a CEC-compatible component is
connected to the receiver via HDMI cable, the
name of the connected component is displayed
on the receiver. For example, when you are
watching TV, if you turn on a Blu-ray Disc/DVD
player by the receiver’s remote control, the
name of the Blu-ray Disc/DVD player is
displayed on the receiver.
• Set to Off when a connected piece of
equipment is not compatible or it is unclear
whether the equipment is compatible or not.
• If movement is unnatural when set to On,
change the setting to Off.
• Refer to the connected component’s instruction
manual for details.
Notes
• Only the input source assigned to the HDMI IN
via “HDMI Input” is enabled.
• The power consumption during standby mode
will increase when the HDMI Through function
is turned on, however, in the following cases,
the power consumption does not increase:
• The TV is in standby mode.
• You are watching a TV program.
• Refer to the connected component’s instruction
manual for details.
• Depending on the connected component, the
correct input source may not be selected with
the setting set to Auto.
• This setting is set to Off automatically when CEC
Function is set to Off.
Notes
• If On is selected and the signal can be output by
the TV, the receiver outputs no sound through
its speakers.
• If On is selected, TV Sp On appears on the
display when you press DISPLAY.
• When TV Control is set to On, this setting
default is Auto.
• With some TVs and input signals, no sound may
be output, even when this setting is On.
• When the Audio TV OUT or TV Control are set
to On, and you are listening through your TV’s
speakers, if you turn up the receiver’s volume
control, the sound is output by the receiver’s
front left and right speakers. To stop the
receiver’s speakers from producing sound,
change the settings, change your TV’s settings,
or turn down the receiver’s volume.
Notes
• The Audio Return Ch setting can only be set
when HDMI Control is On.
• This setting is set to Auto automatically when
HDMI Control is set to On first time.
NS-HT511_11-0310_MAN_.book Page 24 Wednesday, April 13, 2011 11:12 PM