Intel Server Board S5000PAL - Manual (Page 24)

Intel
®
Server Board S5000PAL / S5000XAL TPS Functional Architecture
Revision 1.4
Intel order number: D31979-007
25
3.1 Intel
®
5000P and 5000X Memory Controller Hubs (MCH)
This section will describe the general functionality of the memory controller hub as it is implemented on
this server board. Depending on the version of the server board in use, it may support either the Intel
®
5000P MCH or the Intel ® 5000X MCH. Features that are unique to a particular MCH will be so referenced.
The Memory Controller Hub (MCH) is a single 1432 pin FCBGA package which includes the following
core platform functions:
• System Bus Interface for the processor sub-system
• Memory
Controller
• PCI Express* Ports including the Enterprise South Bridge Interface (ESI)
• FBD Thermal Management
• SMBUS
Interface
Additional information about MCH functionality can be obtained from the Intel ®
S5000 Series Chipsets
Server Board Family Datasheet, the Intel ®
5000P Memory Controller Hub External Design Specification
(Yellow Cover), or the Intel
®
5000X Memory Controller Hub External Design Specification (Yellow Cover).
Note: Yellow Cover documents can only be obtained under NDA with Intel and ordered through an Intel
representative.
3.1.1 System Bus Interface
The MCH is configured for symmetric multi-processing across two independent front side bus interfaces
that connect to the Dual-Core Intel
® Xeon ® processors 5000 sequence. Each front side bus on the MCH
uses a 64-bit wide 1066 or 1333 MHz data bus. The 1333 MHz data bus is capable of transferring data at
up to 10.66 GB/s. The MCH supports a 36-bit wide address bus, capable of addressing up to 64 GB of
memory. The MCH is the priority agent for both front side bus interfaces, and is optimized for one
processor on each bus.
3.1.2 Processor Support
The server board supports one or two Dual-Core Intel ® Xeon ® processors 5000 sequence, with system
bus speeds of 667 MHz, 1066 MHz, and1333 MHz, and core frequencies starting at 2.67 GHz. Previous
generations of the Intel
® Xeon ® processor are not supported on this server board.
Note: Only Dual-Core Intel ® Xeon ® processors 5000 sequence, that support system bus speeds of 667
MHz, 1066 MHz, and1333 MHz are supported on this server board. See the following table for a list of
supported processors.