Interlink electronic L485SIB - Manual (Page 24)

24
www.ultrachefgrills.com
Tabs located on either side of ice bucket
must engage notches in side shelf.
11. Assembling Handles to Side Shelf
Peel protective coating from side shelf. Attach handles to side shelf as shown using (8) 1/4-20 x 3/8” screws.
8 x N570-0073 (1/4-20 X 3/8”) 3/8”(10mm)
485RSIB MODEL
11. Assembling Handles to Side Shelf
Peel protective coating from side shelf. Attach a handle to the front of each side shelf as shown using (2) #14 X 1/2” screws.
Fasten the supplied tool pegs to the side of each side shelf using (2) 10-24 X 1/2” screws and (2) 1/4” washers.
WARNING!
Do not over tighten screws, as this will cause the handle to crack.
3/8”(10mm)
485/485RSB MODEL
4 x N735-0007 (1/4”) 4 x N570-0088 (10-24 X 1/2”) 4 x N570-0080 (#14 x 1/2”)
12. Side Shelf Installation
Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the way.
Slide the assembled side shelf over the screw heads and finish tightening.
13. Side Burner Installation
Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the way.
Slide the assembled side burner over the screw heads and finish tightening. Fit the orifice into the burner tube and secure
with the hose retainer clip supplied. Attach the wire from the manifold to the side burner electrode.