Interlink electronic L485SIB - Manual (Page 27)

27
www.ultrachefgrills.com
4 x N570-0080 (#14 x 1/2”) 3/8”(10mm)
14. Cabinet Door Installation
Install door handle onto front of door using (2) #14 x 1/2” screws per door.
Insert pivot rod through hole on inside top of door. Holding door in one hand, direct pivot rod into hole in underside of
front cabinet support. Once secure, let rod slide down and through hole in bottom of door and into bushing in bottom shelf.
WARNING!
Do not over tighten screws, as this will cause the handle to crack.
2 x N105-0011 (door bushing)
Bushing