Side shelf installation, Side burner installation, 485rsib model – Interlink electronic L485SIB User Manual

Page 25

Advertising
background image

25

www.ultrachefgrills.com

4 x N570-0082 (1/4-20 X 5/8”)

3/8”(10mm)

4 x N735-0001 (insulated washer)

12. Side Shelf Installation

Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the way.
Slide the assembled side shelf over the screw heads and finish tightening.

13. Side Burner Installation

Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the way.
Slide the assembled side burner over the screw heads and finish tightening. Fit the orifice into the burner tube and secure
with the hose retainer clip supplied. Attach the wire from the manifold to the side burner electrode.

4 x N570-0082 (1/4-20 X 5/8”)

3/8”(10mm)

4 x N735-0001 (insulated washer)

WARNING!

The Infrared side burner

is supplied with a drip pan which holds
only a minimal amount of grease. To
prevent grease fires, the pan must be
cleaned after each use.

Fit orifice into burner
tube and secure with hose
retainer clip supplied.

1 x N160-0016 (clip)

485RSIB MODEL

Advertising
This manual is related to the following products: