Intel 3945ABG - Manual (Page 56)

Name Setting
Enterprise Security Select to open the Enterprise Security settings. The security settings
that are available are dependent on the Operating Mode selected:
Device to Device (ad hoc) or Network (Infrastructure) .
Network Authentication If you configure a Device to Device (ad hoc) profile, the default is
Open authentication .
If you configure an Infrastructure profile, select:
●
Open authentication : Any wireless station can request
authentication.
●
Shared authentication : Uses an encryption key known only to
the receiver and sender of data.
●
WPA-Personal or WPA2 Personal : Uses a password also called a
pre-shared key (PSK).
●
WPA-Enterprise or WPA2-Enterprise : Use on enterprise
networks with an 802.1x RADIUS server.
Data Encryption
●
None: No encryption.
●
WEP
●
CKIP
●
TKIP
●
AES-CCMP
Enable 802.1x (Authentication Type) Click to open the following 802.11x authentication types:
●
MD5
●
EAP-SIM
●
TLS
●
TTLS
●
PEAP
●
LEAP
●
EAP-FAST
Cisco Options Click to view the Cisco Compatible Extensions .
NOTE: Cisco Compatible Extensions are automatically enabled for
CKIP and LEAP profiles.
Advanced button Select to access the Advanced Settings to configure the following
options:
●
Auto-Connect : Select to automatically or manually connect to a
profile.
●
Auto-Import this profile (for network administrators only).
●
Mandatory Access Point: Select to associate the wireless
adapter with a specific access point.
●
Password Protection : Select to password protect a profile.
●
Start application : Specify a program to be started when a
wireless connection is made.
Back View the prior page in the Profile Wizard.