Intel 3945ABG - Manual (Page 74)

MS-CHAP-V2. This parameter specifies the authentication protocol operating over the PEAP tunnel.
1. User Credentials: Select one of the following options:
■
Use Windows Logon: Allows the 802.1x credentials to match your Windows user
name and password. Before connection, you are prompted for your Windows logon
credentials.
■
Prompt each time I connect: Prompts for user name and password every time you
log onto the network.
■
Use the following user name and password: The user name and password are
securely (encrypted) saved in the profile.
■
User Name: This user name must match the user name that is set in the
authentication server.
■
Domain: Name of the domain on the authentication server. The server name
identifies a domain or one of its subdomains (for example, zeelans.com, where
the server is blueberry.zeelans.com). NOTE: Contact your administrator to obtain
the domain name.
■
Password: This password must match the password that is set in the
authentication server. The entered password characters display as asterisks.
■
Confirm Password: Reenter the user password.
NOTE:This option is unavailable if Pre-Logon Connect is not selected during installation of the
Intel PROSet/Wireless software. Refer to Install or Uninstall the Single Sign On Feature .
TLS: Transport Layer Security authentication is a two-way authentication method that exclusively uses
digital certificates to verify the identity of a client and a server.
1. Obtain and install a client certificate, refer to Set up the Client for TLS authentication or consult your