Intel 3945ABG - Manual (Page 78)

LEAP User:
1. Select one of the following authentication methods:
❍
Use the Windows logon user name and password: Allows the 802.1x credentials to match your
Windows user name and password. The user's credentials are retrieved from the user's Windows log-
on process. The credentials are only used if the user has no password defined in the Windows log-on
credentials or if there is a problem capturing the Windows log-on credentials.
NOTE: This option is unavailable if Pre-Logon Connect is not selected during installation of the
Intel PROSet/Wireless software. Refer to Install or Uninstall the Single Sign On Feature .
❍
Prompt for the user name and password: Select to prompt for the user name and password
before you connect to the wireless network. The user name and password must be first set in the
authentication server by the administrator.
❍
Use the following user name and password: Select to save your user name and password for
future use when an 802.1x authentication profile is used.
■
User Name: This user name must match the user name that is set in the authentication
server by the administrator prior to client authentication. The user name is case-sensitive.
This name specifies the identity supplied to the authenticator by the authentication protocol.
This user's identity is securely transmitted to the server only after an encrypted channel has